Six precautions for creating a warm bathroom

2022-07-22
  • Detail

Sanitary ware has increasingly become a focus of people's decoration life, and many people have made more efforts in sanitary ware, but how to create a comfortable and warm sanitary ware? Next, let's learn about the precautions of bathroom construction with Xiaobian

sanitary ware has increasingly become a focus of people's decoration life. Many people have also made more efforts in sanitary ware, but how to create a comfortable and warm sanitary ware? Next, let's learn about the precautions of bathroom construction with Xiaobian

brand store: chinaware bathroom and eurusca bathroom

first, the threshold is the checkpoint to prevent water from overflowing from the bathroom. Its design and construction points are:

1. The upper plane of the threshold should be inclined to the inside of the bathroom, so that water droplets can slide smoothly to the inside of the bathroom

2. The threshold should be the same width as the door frame, and the door frame should be the same thickness as the wall, so that there will be no big difference when laying floor tiles, and the chance of creating a breach will be relatively reduced

second, there are many kinds of waterproof materials on the ground, and waterproof agents are widely used at present. When laying the waterproof layer, it should be paved to about 20 cm above the foot of the wall, and at least not lower than the height of the threshold. When there is a reserved pipe on the floor, the waterproof layer also needs to cover the reserved pipe. After the floor is waterproof and dry, cement mortar must be used for priming or protective measures must be taken immediately to prevent the waterproof layer from being damaged

III. there are three main points for floor tile laying:

1. There should be a drainage slope of about 1%, and the slope should face the water inlet under the floor

2. The floor tile joint should be the same thickness and aligned with the wall tile joint

3. When the front wall of the bathtub is built with bricks, it is best to stick the floor tiles below the wall first, and then stick the wall tiles to avoid cracks

IV. choose “ Tongti ” Of (i.e. the surface material of the table top is consistent with the internal material composition and color), the table top with only one layer of surface rubber shell cannot be selected, because the table top with only surface rubber shell cannot be repaired once it is damaged. (to check whether the table top is “ all-in-one ”, you can use light to illuminate it from the back closely, and the table top that can transmit light is “ all-in-one &rdquo.). In addition, caulking agent must be applied at the joints between the table top and the washbasin to prevent water from seeping out from the joints

v. generally, when installing the toilet, it is customary to fix the toilet with cement mortar. In fact, this method is wrong. After fixing the toilet with this method, the toilet cannot be disassembled again. If the pipeline is seriously blocked, there is only one way to knock off the toilet

VI. generally, when people build houses, they don't pay much attention to the bathroom ventilation equipment, and most of them just install an exhaust fan. The bad gas in the bathroom cannot be discharged outdoors, but is still circulating in the bathroom

link: practical tricks to teach you to choose and buy the overall bathroom

深圳不孕不育医院

哈尔滨男科医院

成都外阴白斑医院

石家庄胎记医院

Copyright © 2011 JIN SHI